Save the Date for LiUNA Career Fair: Laborer Trade and Their Apprenticeship Program

What: LiUNA Career Fair
Friday, May 13, 2022, from 9 a.m. to 1 p.m.
Construction Laborers’ Training Center, 2350 Main St., Lino Lakes, MN 55038

Attend the LiUNA Career Fair to learn about the laborer trade and their
apprenticeship program. Registration is recommended, but not required.

For more information and to register call 651-653-6710. 

443 Lafayette Road N. 

St. Paul, MN 55155 


Steel Import Applications on the Rise

Steel import applications during March were 32 percent higher than February.

Import applications for March totaled 3,087,000 net tons, according to U.S. Commerce Department data as reported by the American Iron and Steel Institute.

The March total compares to 2,333,000 permit tons recorded in February, according to the data.

Over the first three months of 2022, total steel import applications were 8,471,000 net tons, a 27.8 percent increase compared to the same period in 2021. Finished steel import applications were 6,697,000 net tons, a 50.1 percent increase compared to last year.

Steel products with the largest increases in March permits compared to February were standard pipe, wire rods, structural pipe and tubing, hot rolled sheets, and oil country goods.

Canada, Mexico, South Korea, Brazil, and Vietman were the largest steel import applicants in March.

Northeastern Minnesota’s six taconite plants produce iron ore pellets, the raw ingredient used to make steel in blast furnaces.


(Business North)

Input Prices For Nonresidential Construction Climb 21 Percent Between March 2021 And March 2022; Association Calls For Relief From Tariffs

Diesel Fuel Prices Spiked 64 Percent, While Aluminum and Steel Mill Product Prices Rose by 43 Percent From a Year Earlier, Pressuring Contractors Operating under Fixed-Price Construction Contracts

Prices of materials and services used in new nonresidential construction jumped more than 21 percent from March 2021 to March 2022, according to an analysis by the Associated General Contractors of America of government data released today. The association urged the Biden administration to relieve major cost pressures by removing the remaining tariffs on aluminum, steel, and Canadian lumber.

“Construction firms have been burdened with cost increases of 20 percent per year or more since early 2021,” said Ken Simonson, the association’s chief economist. “Since contractors can seldom pass along increases on projects that are underway, these extreme price hikes threaten the viability of many firms. Unfortunately, the continuing war in Ukraine is likely to keep input costs elevated for many more months, if not longer.”

The producer price index for inputs to new nonresidential construction—the prices charged by goods producers and service providers such as distributors and transportation firms—rose 2.7 percent from February to March and 21.5 percent over the past 12 months. In comparison, the index for new nonresidential building construction—a measure of what contractors say they would charge to erect five types of nonresidential buildings—rose 0.6 percent for the month and 17.0 percent from a year earlier. March was the 18th-straight month in which the cost index rose more than the bid-price index on a year-over-year basis, Simonson noted.

Prices rose faster than the 17 percent increase in bid prices for a wide range of inputs in the cost index. The price index for diesel fuel leaped 63.8 percent over 12 months. The index for aluminum mill shapes jumped 43.7 percent. The index for steel mill products climbed 42.9 percent. The index for plastic construction products rose 35.2 percent over 12 months.

In addition, year-over-year increases exceeded 17 percent for the indexes covering truck transportation of freight, which climbed 24.5 percent; asphalt and tar roofing and siding products, 22.6 percent; lumber and plywood, 20.9 percent; gypsum products, 20.8 percent; architectural coatings, 20.6 percent; and insulation materials, 17.4 percent.

Association officials said tariffs as high as 25 percent on steel, 18 percent on Canadian lumber, and 10 percent on aluminum have worsened the extreme price increases for these inputs. They urged the Biden administration to remove the tariffs immediately to provide relief for employers grappling with rapidly rising materials costs.

“Given the impact inflation is already having on the economy, it makes no sense for the administration to continue to needlessly inflate the cost of key construction materials,” said Stephen E. Sandherr, the association’s chief executive officer. “Removing these tariffs will take some of the price pressure off of employers grappling to control costs.”

View producer price index data. View chart of gap between input costs and bid prices.



No special session? No matching money for federal construction funds

The Minnesota Chamber of Commerce’s semi-annual Statewide Policy Tour is your opportunity to discuss how actions at the capitol impact your business. Throughout June, the Chamber will host a series of tours based on geographical regions. Join us and your peers and help discuss policy impacts to help your business – and the economy as a whole – recover and succeed throughout the state.

Tuesday, May 31

St. Cloud
9:00 a.m. – 10:00 a.m.


2:30 p.m. – 3:30 p.m.
Clow Stamping
Tour available 3:30 p.m. – 4:30 p.m.


Thursday, June 2

8:00 a.m. – 9:00 a.m.
Park Tool
Tour available 9:00 a.m. – 9:15 a.m.


Monday, June 6

1:00 p.m. – 2:00 p.m.
Tour available 2:00 p.m. – 3:00 p.m.


Thursday, June 9

10:00 a.m. – 11:00 a.m.
The Watkins Co.
Tour available 11:00 a.m. – 11:45 a.m.



12:00 p.m. – 1:00 p.m.
Tour available 1:00 p.m. – 2:00 p.m.

Wednesday, June 1

9:00 a.m. – 10:00 a.m.
Heritage Bank


Friday, June 3


9:00 a.m. – 10:00 a.m.

Bolton & Menk – Holiday Inn


1:30 p.m. – 2:30 p.m.
Bolton & Menk – Courtyard by Marriott


Wednesday, June 8
2:30 p.m. – 3:30 p.m.
Custom Alarm/Custom Communications, Inc.
Tour available 3:30 p.m. – 4:00 p.m.
Friday, June 10

Thief River Falls
12:30 p.m. – 1:30 p.m.
North Risk Partners


Tuesday, June 15

10:30 a.m. – 11:30 a.m (with lunch to follow meeting)
12:30 p.m. – 1:30 p.m. (with lunch prior to meeting)